Teardown of Baseus 65W GaN5 Pro Fast Charger (2C1A)

You can buy it on Amazon: https://bit.ly/3WelOIQ

If you wanna buy the tester of POWER-Z, you can visit our Amazon store: Click here.

Introduction
---------------------------------------------------------------
Back to 2021, we posted a teardown video of the third generation of Baseus 65W GaN charger, which has gotten many views.
And today, we got the fifth generation of this 65W charger, which is equipped with two USB-C and a USB-A port. We gonna take it apart and see if there are any improvements to the previous generation.

Bill of materials (BOM)
------------------------------------------
Model: CCGAN65S5
Time-delay Fuse: Better Electronics
Safety X2 Capacitor: DGCX
Bridge Rectifier: S5MB
Electrolytic Capacitor: Yongming
Master Control Chip: Southchip SC3057
SMD Y Capacitor: TRX
Optocoupler: UTC UPC1009G
Synchronous Rectification Controller: Southchip SC3503
Synchronous Rectifier: LiHo Micro LH032N100
Solid Capacitor: Yongming
Protocol Chip: Ismartware SW3556
MCU: Chipsea CSU32P10
Buck MOSFETs: LiHo Micro LH100N03, LH75N03
VBUS MOSFET (USB-C1): LiHo Micro LH075N03
VBUS MOSFET (USB-C2, USB-A): LiHo Micro LH3020