Ultra-Slim & GaN | Teardown of Baseus 65W Charger (1A1C)

You can buy it on Amazon: https://amzn.to/3p04MTL

If you wanna buy the tester of POWER-Z, you can visit our Amazon store: Click here.

Introduction
---------------------------------------------------------------
Recently, we got a brand-new ultra-slim charger from Baseus. It can support up to 65W output power, but the thickness is only about 16.6mm or 0.66 inches. It's also equipped with a USB-A and a USB-C port for fast charging. Let's go ahead and take it apart to see how it can be so thin.

Bill of materials (BOM)
------------------------------------------
Model: CCGAN65C5-UT
Time-delay Fuse: CHEVRON
Safety X2 Capacitor: DGCX
Bridge Rectifier (Diode): S5MB
Electrolytic Capacitor: Yongming
Master Control Chip: Southchip SC3057
SMD Y Capacitor: TRX TMY1102M, TRX TMY1221K
Synchronous Rectification controller: Southchip SC3503
Synchronous Rectifier: LIHOMicro LH032N100
Solid Capacitor: Yongming
Protocol Chip: Ismartware SW3556
Buck MOSFET: LIHOMicro LH100N03, LIHOMicro LH75N03
MCU: Chipsea CSU32P10