The King of Chargers | Teardown of EGO EXINNO 240W

You can buy it on Indiegogo: https://igg.me/at/exinno/

If you wanna buy the tester of POWER-Z, you can visit our Amazon store: Click here.

Introduction
---------------------------------------------------------------
We received many comments requesting the teardown of the Ego Exinno 240W charger.
Since it can support up to 240W, it is called “The King of Chargers.”
And it can also support all fast charging protocols.
This is a big brick, which takes us a lot of time to take apart.
So, let’s start today’s video.

Bill of materials (BOM)
------------------------------------------
Fuse: CONQUER (5A 250V)
Safety X2 Capacitor: JURCC (0.47μF)
Bridge Rectifier: JF GBU810 (8A 1000V)
Film Capacitor: JURCC (0.47μF 500V)
Filter Capacitor: 25V 330μF
PFC Controller: ON Semiconductor NCP1632
GaN IC for PFC Boost: Navitas NV6127
PFC Boost Rectifier: SGKS KS06065D
Electrolytic Capacitor: 33μF 400V
Master Control Chip: ON Semiconductor NCP13992
GaN IC for LLC Topology: Navitas NV6125
Secondary Synchronous Rectifier: LONTEN LSGN06R036HWB
Synchronous Rectifier Controller: ON Semiconductor NCP4306
Solid Capacitor: 1000μF 25V
SMD Y Capacitor: TRX TMY1102M
Step-down Controller: Ismartware SW3518S
MCU: Cmsemicon CMS8S5880
Synchronous Step-down MOSFET: ZMJ Semi ZM045N03N
Synchronous Step-down MOSFET: R03N041AP
LED driver: Titan Micro TM1629B