Teardown of Xiaomi 100W USB-C GaN Charger (AD100G)

If you wanna buy the tester of POWER-Z, you can visit our Amazon store: Click here.

Introduction
---------------------------------------------------------------
ChargerLAB got a 100W GaN charger from Xiaomi, which comes with Redmi Laptops.
Xiaomi has also launched a non-GaN 100W charger before.
Let's take a look at the internal changes after upgrading the GaN charger.

Bill of materials (BOM)
------------------------------------------
Input Fuse: Better Electronics (3.15A 250V)
Safety X2 Capacitor: 0.33μF
Bridge Rectifier: Yangjie D6UB100 (6A 1000V)
Film Filter Capacitor: 1μF 450V
PFC Controller: MPS MP44018A
GaN IC for PFC Boost: Navitas NV6134A (260mΩ, 650V)
Filter Capacitor: AiSHi (420V 27μF, 420V 15μF)
Primary PWM Controller: ON Semiconductor NCP1342
Power Supply Capacitor: AiSHi (100V 10μF)
GaN IC for QR Topology: Navitas NV6134A
Blue Y Capacitor: SEC
Optocoupler: CT1018
Synchronous Rectifier Controller: MPS MP6908A
Synchronous Rectifier: Toshiba TPH4R50ANH1 (100V, 3.7mΩ)
Output Filter Capacitor: BERYL(820μF 25V)
Protocol Chip: Weltrend WT6636F
Output VBUS MOSFET: AOS AON6354 (30V, 2.75mΩ)