Teardown of Anker 65W 2-in-1 Hybrid Charger (733 Power Bank)

You can buy it on Amazon: https://amzn.to/3LZRv4x

If you wanna buy the tester of POWER-Z, you can visit our Amazon store: Click here.

Introduction
---------------------------------------------------------------
Several weeks ago, we published the teardown of Anker 140W PD3.1 power bank, which has more than 100k views.
And today, we got another Anker power bank of the GaNPrime series. It’s a 10000 mAh power bank and also a 65W AC charger.

Bill of materials (BOM)
------------------------------------------
Safety X2 Capacitor: DGCX, 0.15μF
Bridge Rectifier: MB50M
Electrolytic Capacitor: Yongming
Master Controller: PI INN3378C, PI INN3365C
SMD Y Capacitor: TRX TMY1471K
Synchronous Rectifier: AOS 66940
Solid Capacitor: Yongming (680μF, 25V)
MOSFET: Excelliance EMB09N03V
Protocol Chip: Injoinic IP2738
Power Bank SOC: Injoinic IP5389
Synchronous Buck-boost MOSFET: Vanguard VS3622DP2
Voltage Regulator Chip: 8DLKX
VBUS MOSFET: Excelliance EMB09N03V