The newest version of PC Software can be downloaded from here

NEWS ALERT. After much planning and preparation, we’ve recently launched a new USB PD tester called the POWER-Z KM001C.

Our POWER-Z KM001C is inspired by the KM001 and has the same black and gold color scheme. The tester’s height is only about 0.74 cm and the width is smaller than 2.5 cm (the diameter of a Chinese Yuan coin). It’s very compact and organized with all the necessary components. KM001C features a 1″ OLED display screen, which is very big for such a tiny body.


The POWER-Z, our website, and KM001C logo is printed on the back. As for the interface configuration, we decided to remove the USB-A and  MicroUSB interface on the POWER-Z KM001C, but retained the USB-C and HID communication interface. However, we did decide to incorporate something new to this tester – a USB-C male interface.

As for the performance, the POWER-ZKM001C has the maximum test capability of 20V/5A. It supports USB PD 3.0 decoy and packet analysis,  multiple protocol detection, QC 4+/3.0/2.0, FCP, SCP, AFC, online synchronous test and off-line data recording, E-marker cable test, and Type-C resistance testing.

With the USB-C male interface, POWER-Z KM001C can allow users to test without the tedious wiring process. With the gold-plated pin design, it also effectively reduces the resistance and ensures that the test data the most accurate to the actual value.
Lastly, the POWER-Z KM001C has also added a dialogue box to the computer software. This allows the tester to display the instrument’s relevant parameters directly on the computer. In addition, a variety of fast-charging protocols can also be control on the computer; making it a lot more convenient and efficient.


1 COMMENT

  1. Hello.
    I have 2 questions.

    ### 1. About Power-z KM001 and KM001C

    KM001 and KM001C support only minimum 3.6 second / point interval when offline save. Why ?
    I need record 1 second / point like KT001 Model at KM001.

    How can i change from 3.6 second/point to 1 second/point ?

    ### 2. About Power-z KT001

    KM001 has a function to merge memorys. But…

    Why do not have KT001 a function to merge memory like KM001 ?
    I need record a function to merge memory like KM001 at KT001.

    How can i get a function to merge?

LEAVE A REPLY

Please enter your comment!
Please enter your name here